Superior technology for industrial cleaning

HAKOMATIC B1100 Vacuum Sweeper & Scrubber-Drier

Dust-free sweeping, wet scrubbing and dry vacuuming in one operation.
Hakomatic B1100: Two possibilities in one machine for perfect cleanliness up to 7000m²/hour.
The Hakomatic B1100 can offer:

 

You want

Better Performance

 
A choice of equipment to meet your requirements:
Wet scrubbing and dry vacuuming in one operation
(working width of 102 cm), and in addition, a pre-sweep option
(working width of 138 cm).

Long running times, thanks to the 310 litre tank volume.
Optional dirty water recycling system for multiple use of the
cleaning solution.  

A strong industrial heavy duty forklift truck drive with power 
reserves for gradients of up to 20%.

2 separate drive motors for the scrubbing brushes with high
degree of stability even when carrying out thorough, basic
cleaning.

Working close to the edge and increased working width up to 
118 cm when wet scrubbing as a result of the suspended side
scrubbing unit (option).

 

You want

Increased Comfort

 The Hakomatic B1100 can offer:

The "Hakomatic button:" All working functions such as wet scrubbing, supply of water, dry vacuuming, work at the push of a single button.

The "Hako Control System:" The machine is programmed by our engineers according to your specific requirements (e.g. Brushes and water supply stop when machine comes to a standstill).

Quiet battery drive, free from exhaust fumes and quick exchange of batteries in approximately 2 minutes.

An ergonomic workplace with fully spprung driver's seat which can be adjusted to the driver's weight. All operating controls are in direct reach of the operator. Easy steering and simple to operate.

Optimum view of the area to be cleaned and of the operating panel, thanks to the seating position at the centre of the machine. Handy because the operator can mount the machine from both sides.

 

You want

Greater Economy

 The Hakomatic B1100 can offer:

Up to 50% saving of water and cleaning agents as a result of the Hako "Aqua-Stop System." Checked and approved. The saving over the lifetime of the machine practically corresponds to the initial purchase price.

Further saving (by half) of the remaining costs of the cleaning agents as a result of the cleaning agent dosage system (optional).

Short set-up times, thanks to the automatic water filling system (7-8 times). Tanks are easy to clean.

Cost savings in the service area as a result of direct access to all important components and an intelligent diagnostic system with display of malfunction codes etc.

Possibility to connect the Hako diagnostic unit which can be purchased separately. This makes maintenance work even easier.
Performance and quality down to the very last detail.
Technical data: Hakomatic B1100
Area Performance   Electrical Equipment  
(max. theoretical) up to 7000m²/hr Rated Voltage 36 V
Wet Cleaning Unit   Drive Battery 36 V / 640 Ah5 PzS
Working Width Brush Head 102 cm Protection Class (VDE 0700) III
Brush Diameter (2 units) 53 cm Drive  
Brush Revolutions 210 rpm Drive Motor 2400 W
Brush Motor (2 units) 2x700W Working Speed, up to 7.0 km/hr
Brush Pressure up to 540 N Drive Speed, up to 8.0 km/hr
Specific Brush Pressure up to 0.17 N/cm² Climbing Ability, Empty/Full 20% / 15%
Squeegee (Working Width) 126 cm Dimensions & Weight  
Flexible Wall Tank 310 lt Length without/with Pre-Sweep 215 cm / 262 cm
Sweeping System   Width with Squeegee/Pre-Sweep 126 cm / 138 cm
Working Width 138 cm Height without/with Overhead Guard 140 cm / 200 cm
Sweeping Principle Front throwing Diameter of Turning Circle 240 cm
Dust Filter (Dust Category) U/BIA Weight, empty, without Drive Batteries 707 kg
    Total Weight, Ready for Operation 1787 kg
Choice of Further Equipment/Special Accessories Available:
- Pre-Sweep Unit                                - Side Scrubbing Unit                                    - Dirty Water Recycling System             - Cleaning Agent Dosage System
- Solid Wall or Flexible Wall Tank          - Overhead Guard with Rear-View Mirror          - Warning Beacon                                  - Working Lights 
- Hand Held Suction Hose                                                                                     - Various Types of Brushes and Pads
 
Π   The Hakomatic B1100 offers the highest product quality and long lifetime s a result of modern manufacturing processes
            and a strict quality assurance system. The Hakomatic B1100 has been manufactured in accordance with the CE
            guidelines and fulfills the European Safety Norm EN 60 335. 
            Hakomatic B1100 - "Quality made by Hako."
In the interest of technical progress, Hako-Werke reserve the rights to alter equipment without prior notice.